Cisco 9971 - Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager

Possible explanation and actionDescriptionMessage
None. This message indicates the
name of the configuration file for the
phone.
Name of the configuration file.XmlDefault.cnf.xml, or
.cnf.xml corresponding to the
phone device name
Related Topics
Configure Network Settings, on page 70
Display Ethernet Statistics Screen
The Ethernet Statistics screen displays information about the phone and network performance.
To display the Ethernet Statistics screen, follow these steps:
Procedure
Step 1
Press Applications .
Step 2
Select Administrator Settings.
Step 3
Select Status.
Step 4
Select Status > Ethernet Statistics. See Ethernet Statistics Information, on page 272 for a description of the
Ethernet statistics fields.
Step 5
To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press Clear List.
Step 6
To exit the Ethernet Statistics screen, press Exit.
Ethernet Statistics Information
The following tables describe the information in the Ethernet Statistics screen.
Table 36: Ethernet Statistics Information
DescriptionItem
Number of packets that the phone received.Rx Frames
Number of packets that the phone sent.Tx Frames
Number of broadcast packets that the phone received.Rx Broadcasts
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0
272
Cisco Unified IP Phone Status