Cisco 9971 - Add Users to Cisco Unified Communications Manager

For more information about using BAT, see the documentation for your particular Cisco Unified
Communications Manager release.
Procedure
Step 1
From Cisco Unified Communications Administration, choose Bulk Administration > Phones > Phone
Template.
Step 2
Click Add New.
Step 3
Choose a Phone Type and click Next.
Step 4
Enter the details of phone-specific parameters, such as Device Pool, Phone Button Template, and Device
Security Profile.
Step 5
Click Save.
Step 6
Select Device > Phone > Add New to add a phone using the BAT phone template.
Add Users to Cisco Unified Communications Manager
You can display and maintain information about the users registered in Cisco Unified Communications
Manager. Cisco Unified Communications Manager also allows each user to perform these tasks:
•
Access the corporate directory and other customized directories from a Cisco IP Phone.
•
Create a personal directory.
•
Set up speed dial and call forwarding numbers.
•
Subscribe to services that are accessible from a Cisco IP Phone.
Procedure
Step 1
To add users individually, see Add User Directly to Cisco Unified Communications Manager, on page 93.
Step 2
To add users in batches, use the Bulk Administration Tool. This method also enables you to set an identical
default password for all users.
For more information, see the documentation for your particular Cisco Unified Communications Manager
release.
Add a User from an External LDAP Directory
If you added a user to an LDAP Directory (a non-Cisco Unified Communications Server directory), you can
immediately synchronize the LDAP directory to the Cisco Unified Communications Manager on which you
are adding the user and the user phone.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0
92
Add Users to Cisco Unified Communications Manager