Set Up RTCP Control
Configure the RTCP for video parameter from the Phone Configuration or Common Phone Profile Configuration
window in Cisco Unified Communications Manager Administration.
By default, RTCP is turned on.Note
Procedure
Step 1
In Cisco Unified Communications Manager, access one of the following windows:
•
Device > Device Settings > Common Phone Profile
•
Device > Phone
Step 2
Configure the RTCP for Video parameter.
Set Up Simplified New Call Window
The Simplified New Call Window feature provides a new user interface for off-hook dialing. It is disabled
by default.
The Simplified New Call Window does not allow the user to select a number from the call history.
Procedure
Step 1
In the Cisco Unified Communications Manager Administration, select Device > Phone.
Step 2
Set the Simplified New Call UI field to Enabled.
Set Up Automatic Port Synchronization
You can set up synchronization on a single phone or a group of phones.
Procedure
Step 1
To configure Automatic Port Synchronization for a single phone,
a) In the Cisco Unified Communications Manager Administration application, choose Device > Phone
b) Locate the phone.
c) In the Product Specific Configuration Layout pane, set the Automatic Port Synchronization parameter.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0
220
Set Up RTCP Control
To Next Page
Loading...
Need help?
General
