Cisco 9971 Administration Guide

Lockable Wall Mount Components for Phone
This section describes how to install a wall mount for the Cisco Unified IP Phone 8961, 9951, and 9971.
Figure 5: Wall Mount Kit for Single Phone Assembly
The package includes these items:
•
One phone bracket
•
One wall bracket
•
Four #10-12x1-inch Phillips-head screws with 4 anchors
•
One sheet metal screw (not shown)
•
Two #4-40x1/4-inch machine screws
•
One 6-inch Ethernet cable
•
One key if the bracket includes the optional lock
Install Bracket
Before You Begin
You need these tools to install the bracket:
•
#1 and #2 Phillips-head screwdrivers
•
Level
•
Pencil
You must also install an Ethernet jack for the telephone in the desired location if an Ethernet jack does not
currently exist. This jack must be wired appropriately for an Ethernet connection. You cannot use a regular
telephone jack.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0
126
Lockable Wall Mount Components for Phone

Cisco 9971 Specifications

General

Resolution	640 x 480 pixels
Programmable Line Keys	5
Protocols	SIP, SCCP
Wi-Fi	802.11a/b/g
Weight	3.5 lbs
Display	5-inch color LCD
Audio	Wideband audio, G.722 codec support
USB Ports	2 x USB 2.0
Ethernet Ports	2
PoE	Yes (802.3af)
Video	H.264
Network Interfaces	10/100/1000 Ethernet
Codecs	G.711, G.722, G.729a, G.729ab, iLBC
Power Options	PoE
Headset Port	Dedicated headset port
Speakerphone	Full-duplex speakerphone