Procedure
Step 1
From Cisco Unified Communications Manager Administration, choose Device > Device Settings > Feature
Control Policy.
Step 2
Click Add New to define a set of policies.
Step 3
Enter the following settings.
•
Name: Enter a name for a new Feature Control Policy
•
Description: Enter a description.
•
Feature Control Section: Check the check box for the features for which you want to change the default
setting.
Step 4
Click Save.
Step 5
Apply the policy to the phone by including it in the following windows:
•
Enterprise Parameters Configuration: Applies to all phones in the system.
•
Common Phone Profile Configuration: Applies to all phones in a group.
•
Phone Configuration: Applies to an individual phone.
Feature Control Policy Default Values
The following table lists the features that a Feature Control Policy can control and their default values.
Table 24: Feature Control Policy Default Values
Default valueFeature
EnabledForward All
DisabledPark
DisabledTo Voicemail
EnabledConference List
EnabledSpeed Dial
EnabledCall Back
EnabledRedial
EnabledBarge
DisabledMalicious Caller ID
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
209
Create Feature Control Policy
To Next Page
Loading...
Need help?
General
