Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Configuring IP Information
Domain Name System
Cisco Small Business SFE/SGE Managed Switches Administration Guide 227
7
STEP 1 Click System > System Management > IP Addressing > Domain Name System >
Host Mapping. The
Host Mapping Page opens:
Host Mapping Page
The
Host Mapping Page contains the following fields:
• Host Names — Displays a user-defined default domain name. When defined,
the default domain name is applied to all unqualified host names. The
Host
Name
field can contain up to 158 characters.
• IP Address — Displays the DNS host IP address.
STEP 2 Click the Add button. The Add Host Name Page opens:
The Add Host Name Page provides information for defining DNS Host Mapping.

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x