Configuring Quality of Service
Defining General Settings
Cisco Small Business SFE/SGE Managed Switches Administration Guide 283
11
STEP 1 Click Quality of Service > General > VLAN Rate Limit. The
VLAN Rate Limit Page
opens:
VLAN Rate Limit Page
The
VLAN Rate Limit Page
contains the following fields:
• VLAN – Indicates the VLAN on which the Rate Limit is applied.
• Rate Limit – Defines the maximum rate (CIR) in kbits per second (bps) that
forwarding traffic is permitted in the VLAN.
• Burst Size – Defines the maximum burst size (CbS) in bytes that forwarding
traffic is permitted through the VLAN.
STEP 2 Click the Add button. The
Add VLAN Rate Limit Page
opens:
To Next Page
Loading...
