Cisco SGE2000 - Cisco - Gigabit Switch - Page 320

Configuring SNMP
Configuring SNMP Security
Cisco Small Business SFE/SGE Managed Switches Administration Guide 311
12
STEP 1 Click System > SNMP > Security > Groups. The SNMP Groups Page opens:
SNMP Groups Page
The
SNMP Groups Page contains the following fields:
• Group Name — Displays the user-defined group to which privileges are
applied.
• Security Model — Defines the SNMP version attached to the group. The
possible field values are:
- SNMPv1 — SNMPv1 is defined for the group.
- SNMPv2 — SNMPv2 is defined for the group.
- SNMPv3 — SNMPv3 is defined for the group.
• Security Level — Defines the security level attached to the group. Security
levels apply to SNMPv3 only. The possible field values are:
- No Authentication — Indicates that neither the Authentication nor the
Privacy security levels are assigned to the group.
- Authentication — Authenticates SNMP messages, and ensures the
SNMP messages origin is authenticated.
- Privacy — Encrypts SNMP message.