Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Contents
Cisco Small Business SFE/SGE Managed Switches Administration Guide 5
Modifying Multicast Forwarding 245
Defining Unregistered Multicast Settings 246
Chapter 10: Configuring Spanning Tree 249
Defining Spanning Tree 249
Defining STP Properties 249
Defining Spanning Tree Interface Settings 252
Modifying Interface Settings 256
Defining Rapid Spanning Tree 258
Modifying RTSP 261
Defining Multiple Spanning Tree 263
Defining MSTP Properties 263
Defining MSTP Instance to VLAN 265
Defining MSTP Instance Settings 266
Defining MSTP Interface Settings 267
Chapter 11: Configuring Quality of Service 273
Defining General Settings 274
Defining CoS 274
Defining QoS Queue 276
Mapping CoS to Queue 278
Mapping DSCP to Queue 279
Configuring Bandwidth 280
Configuring VLAN Rate Limit 282
Defining Advanced QoS Mode 285
Configuring DSCP Mapping 286
Defining Class Mapping 288
Defining Aggregate Policer 290
Configuring Policy Table 293
Defining Policy Binding 297
Defining QoS Basic Mode 299
Rewriting DSCP Values 300

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x