Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Contents
Cisco Small Business SFE/SGE Managed Switches Administration Guide 4
Chapter 7: Configuring IP Information 190
IP Addressing 190
Managing IPv6 190
Viewing IPv6 Routes Table 203
Layer 2 IP Addressing 204
Layer 3 IP Addressing 204
Defining IPv4 Interface (Layer 2) 205
Defining IPv4 Interface (Layer 3) 206
Enabling ARP Proxy (Layer 3) 209
Defining UDP Relay (Layer 3) 210
Defining DHCP Relay (Layer 2) 212
Defining DHCP Relay Interfaces 214
Defining DHCP Relay (Layer 3) 216
ARP 218
Defining IP Routing 221
Domain Name System 224
Defining DNS Servers 224
Mapping DNS Hosts 226
Chapter 8: Defining Address Tables 230
Defining Static Addresses 230
Defining Dynamic Addresses 233
Chapter 9: Configuring Multicast Forwarding 235
IGMP Snooping 235
Modifying IGMP Snooping 237
Defining Multicast Group 238
Modifying a Multicast Group 240
Configuring IGMP Snooping Mapping 242
Defining Multicast TV Membership 243
Defining Multicast Forwarding 244

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x