Cisco SGE2000 - Cisco - Gigabit Switch Administration Guide

Configuring Device Security
Defining Access Methods
Cisco Small Business SFE/SGE Managed Switches Administration Guide 66
4
STEP 1 Click Security Suite > Access Method > Profile Rules. The Profile Rules Page
opens:
Profile Rules Page
The
Profile Rules Page contains the following fields:
• Access Profile Name — Displays the access profile to which the rule is
attached.
• Priority — Defines the rule priority. When the packet is matched to a rule, user
groups are either granted permission or denied device management access.
The rule number is essential to matching packets to rules, as packets are
matched on a first-fit basis.
• Interface — Indicates the interface type to which the rule applies. The possible
field values are:
- Port — Attaches the rule to the selected port.
- LAG — Attaches the rule to the selected LAG.
- VLAN — Attaches the rule to the selected VLAN.
• Management Method — Defines the management method for which the rule is
defined. Users with this access profile can access the device using the
management method selected. The possible field values are:
- All — Assigns all management methods to the rule.

Cisco SGE2000 - Cisco - Gigabit Switch Specifications

General

Form Factor	Rack-mountable
Switching Capacity	48 Gbps
Forwarding Rate	35.7 Mpps
Layer	Layer 2
Power Supply	Internal
Management	Web-based, SNMP, CLI
MAC Address Table Size	8000 entries
VLANs	256
Features	Quality of Service (QoS), IGMP snooping, Port mirroring
Dimensions (W x D x H)	440 x 257 x 44 mm (17.3 x 10.1 x 1.73 in)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Relative Humidity	10% to 90% non-condensing
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x