Configuring Device Security
Defining Access Methods
Cisco Small Business SFE/SGE Managed Switches Administration Guide 70
4
• Prefix Length — Defines the number of bits that comprise the source IP
address prefix, or the network mask of the source IP address.
• Action — Defines the action attached to the rule. The possible field values are:
-
Permit
— Permits access to the device.
-
Deny
— Denies access to the device. This is the default.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The profile rule is added, and the device is updated.
Modifying Profile Rules
STEP 1 Click Security Suite > Access Method > Profile Rules. The
Profile Rules Page
opens:
STEP 2 Click the Edit button. The
Edit Profile Rule Page
opens:
Edit Profile Rule Page
The
Edit Profile Rule Page
contains the following fields:
• Supported IP Format — Indicates the supported IP version. The possible
values are:
To Next Page
Loading...
