200 IGMP Snooping Commands
Command Mode
User EXEC mode.
User Guidelines
• To see the full Multicast Address Table (including static addresses) use the
show bridge multicast
address-table
Privileged EXEC command.
Example
The following example shows IGMP snooping information on Multicast groups.
Console> show ip igmp snooping groups
Vlan IP Address Querier Ports
---- ------------------ -------- ------------
1 224-239.130|2.2.3 Yes 1/e1, 2/e2
19 224-239.130|2.2.8 Yes 1/e9-e11
IGMP Reporters that are forbidden statically:
---------------------------------------------
Vlan IP Address Ports
---- ------------------ ------------
1 224-239.130|2.2.3 1/e19
book.book Page 200 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
