Dell PowerConnect 3524

Line Commands 243
Default Configuration
If the line is not specified, the default value is console.
Command Mode
User EXEC mode.
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the line configuration.
Console> show line
Console configuration:
Interactive timeout: Disabled
History: 10
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
Telnet configuration:
Interactive timeout: 10 minutes 10 seconds
History: 10
SSH configuration:
Interactive timeout: 10 minutes 10 seconds
History: 10
book.book Page 243 Thursday, December 18, 2008 7:40 PM