PHY Diagnostics Commands 279
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode.
User Guidelines
The port must be active and working in 100M or 1000M mode.
Example
The following example displays the estimated copper cable length attached to all ports.
Console> show copper-ports cable-length
Port Length [meters]
---- ---------------------
1/e1 < 50
1/e2 Copper not active
1/e3 110-140
1/g1 Fiber
book.book Page 279 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
