Power over Ethernet Commands 285
Example
The following example displays information about inline power.
Console# show power inline
Unit Power Nominal
Power
Consumed
Power
Usage
Threshold
Traps
------ --------- --------- ------------ ---------- --------
1 off 1 Watts 0 Watts (0%) 95 Disable
2 on 370 Watts 0 Watts (0%) 95 Disable
3 off 1 Watts 0 Watts (0%) 95 Disable
4 on 370 Watts 0 Watts (0%) 95 Disable
5 off 1 Watts 0 Watts (0%) 95 Disable
6 on 370 Watts 0 Watts (0%) 95 Disable
7 off 1 Watts 0 Watts (0%) 95 Disable
8 on 370 Watts 0 Watts (0%) 95 Disable
off 1 Watts 0 Watts (0%) 95 Disable
on 370 Watts 0 Watts (0%) 95 Disable
off 1 Watts 0 Watts (0%) 95 Disable
on 370 Watts 0 Watts (0%) 95 Disable
Console> show power inline ethernet 1/e1
Port Powered
Device
State Status Priority Class
---- ---------- ----- -------- ------ --------
2/e1 Auto Searching low class0
2/e2 Auto Searching low class0
2/e3 Auto Searching low class0
2/e4 Auto Searching low class0
2/e5 Auto Searching low class0
book.book Page 285 Thursday, December 18, 2008 7:40 PM