Command Groups 61
show dot1x users Displays active 802.1x authenticated users. Privileged EXEC
show dot1x statistics Displays 802.1x statistics for the specified interface. Privileged EXEC
dot1x auth-not-req Enables unauthorized users access to that VLAN. Interface (VLAN)
Configuration
dot1x multiple-hosts Allows multiple hosts (clients) on an 802.1x-
authorized port that has the dot1x port-control
Interface Configuration mode command set to auto.
Interface Configuration
dot1x single-host-
violation
Configures the action to be taken, when a station
whose MAC address is not the supplicant MAC
address, attempts to access the interface.
Interface Configuration
dot1x guest-vlan Defines a guest VLAN. Interface Configuration
dot1x guest-vlan
enable
Enables unauthorized users on the interface to access
the guest VLAN.
Interface Configuration
dot1x mac-
authentication
Enables authentication based on the station’s MAC
address.
Interface Configuration
dot1x traps mac-
authentication failure
Enables sending traps when a MAC address was failed
in authentication of the 802.1X MAC authentication
access control.
Global Configuration
dot1x radius-attributes
vlan
Enables user-based VLAN assignment. Interface Configuration
show dot1x advanced Displays 802.1x advanced features for the device or for
the specified interface.
Privileged EXEC
book.book Page 61 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
