64 Command Modes
enable password Sets a local password to control access to normal and privilege levels.
end Ends the current configuration session and returns to the previous
command mode.
file-system logging Enables logging file system events.
gvrp enable (Global) Enables GVRP globally.
hostname Specifies or modifies the device host name.
interface ethernet Enters the interface configuration mode to configure an Ethernet
type interface.
interface port-channel Enters the interface configuration mode of a specific port-channel.
interface range ethernet Enters the interface configuration mode to configure multiple
ethernet type interfaces.
interface range port-channel Enters the interface configuration mode to configure multiple port-
channels.
interface range vlan Enters the interface configuration mode to configure multiple
VLANs.
interface vlan Enters the interface configuration (VLAN) mode.
ip access-list Creates Layer 2 ACLs.
ip access-list Creates Layer 2 ACLs.
ip address Sets an IP address.
ip default-gateway Defines a default gateway.
ip dhcp snooping Globally enables DHCP snooping.
ip dhcp snooping database Configures the DHCP snooping binding file.
ip dhcp snooping database
update-freq
Configures the update frequency of the DHCP snooping binding file.
ip dhcp snooping information
option allowed-untrusted
Configures a switch to accept DHCP packets with option-82
information from an untrusted port.
ip dhcp snooping trust Configures a port as trusted for DHCP snooping purposes.
ip dhcp snooping verify Configures a switch to accept DHCP packets with option-82
information from an untrusted port.
ip dhcp snooping vlan Enables DHCP snooping on a VLAN.
ip domain-lookup Enables the IP Domain Naming System (DNS)-based host name-to-
address translation.
ip domain-name Defines a default domain name, that the software uses to complete
unqualified host names.
ip host Defines static host name-to-address mapping in the host cache.
book.book Page 64 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
