70 Command Modes
ip internal-usage-vlan Reserves a VLAN as the internal usage VLAN of an interface.
ipv6 default-gateway Defines an IPv6 default gateway.
ipv6 mld join-group Configures Multicast Listener Discovery (MLD) reporting for a
specified group.
ipv6 mld version Changes the Multicast Listener Discovery Protocol (MLD) version.
lacp port-priority Configures the priority value for physical ports.
lacp timeout Assigns an administrative LACP timeout.
mdix Enables automatic crossover on a given interface.
name Configures a name to a VLAN.
negotiation Enables auto-negotiation operation for the speed and duplex parameters
of a given interface.
port monitor Starts a port monitoring session.
port security Disables new address learning/forwarding on an interface.
port security max Configures the maximum number of addresses that may be learned on
the port while the port is in port security mode.
port security mode Configures the port security learning mode.
port security routed secure-
address
Adds MAC-layer secure addresses to a routed port.
port storm-control broadcast
enable
Enables Broadcast storm control.
port storm-control broadcast
rate
Configures the maximum Broadcast rate.
port storm-control include-
multicast
Enables the device to count Multicast packets.
power inline Configures the administrative mode of the inline power on an interface.
power inline powered-device Adds a description of the powered device type attached to the interface.
power inline priority Displays port monitoring status
qos cos Configures the default port CoS value.
qos cos Configures the default port CoS value.
qos trust (Interface) Enables each port trust state.
qos trust (Interface) Enables each port trust state while the system is in basic mode.
rate-limit (Ethernet) Limits the rate of the incoming traffic.
rmon collection history Enables a Remote Monitoring (RMON) MIB history statistics group on
an interface.
book.book Page 70 Thursday, December 18, 2008 7:40 PM
To Next Page
Loading...
