Chapter 9 Network Configuration
9-21
Adjusting a connection
If users press the left mouse button while the mouse cursor hovers over a connection point which
connects a network and a port, a small picture representing a trash can and a dotted line will appear.
If the users release the left mouse button after they drag the connection point to the small picture
representing a trash, the connection between the network and the port will be canceled.
If the users drag the connection point to the dotted line, the system will connect the port to the new
network added.
If the users release the left mouse button after they drag the connection point to another network which
matches the port, the port will be connected to the network.
To Next Page
Loading...
