AH500 Hardware and Operation Manual
9-22
Deleting a single network by means of a context menu
After users right-click a network, and click Delete the Network on the context menu, the network and the
lines connected to the network will disappear.
Deleting several devices or several networks
Users can select several objects by holding down Shift on the keyboard. Besides, the users can select
multiple devices by dragging a selection net around them, or selecting all the objects in the working area
by pressing Ctrl+A on the keyboard.
After the users click Delete Selections on the Edit menu, click on the toolbar, or press Delete on
the keyboard, the objects selected will be deleted. However, the PLC for which a project is created and
the modules connected to the PLC can not be deleted. Besides, if a PLC is deleted, the modules
connected to the PLC will also be deleted.
To Next Page
Loading...
