AH500 Hardware and Operation Manual
11-52
Method 2
Select a data demanding node, right-click the data demanding node, and click Online (Connect
to a Single Node) on the context menu. When the data demanding node is monitored,
on
the toolbar is pressed.
Enabling the function of monitoring multiple nodes
Method 1
Click Online (All Nodes) on the PLC menu, or on the toolbar.
Method 2
Select All Nodes on the node list, right-click All Nodes, and click Online (All Nodes) on the
context menu.
Additional remark
Before the system enters a monitoring mode, it checks whether the Ether Link constructed in the Ether Link
Configuration window is consistent with the setting in the PLCs. If the Ether Link constructed in the Ether Link
Configuration window is not consistent with the setting in the PLCs, the system will ask the users to download
the related parameters again.
To Next Page
Loading...
