Delta AH500 - Page 566

Chapter 12 Troubleshooting
12-17
Error
Code
Description Solution
16#E230
Ethernet connection error in a redundancy
system
Check the Ethernet connection on the control
mode CPU and standby mode CPU
16#E260
Module on the main backplane slot 0 does
not support a redundancy system.
Update module firmware.
16#E261
Module on the main backplane slot 1 does
not support a redundancy system.
Update module firmware.
16#E262
Module on the main backplane slot 2 does
not support a redundancy system.
Update module firmware.
16#E263
Module on the main backplane slot 3 does
not support a redundancy system.
Update module firmware.
16#E264
Module on the main backplane slot 4 does
not support a redundancy system.
Update module firmware.
16#E265
Module on the main backplane slot 5 does
not support a redundancy system.
Update module firmware.
16#E266
Module on the main backplane slot 6 does
not support a redundancy system.
Update module firmware.
16#E267
Module on the main backplane slot 7 does
not support a redundancy system.
Update module firmware.
16#E268
Module on the main backplane slot 8 does
not support a redundancy system.
Update module firmware.
16#E269
Module on the main backplane slot 9 does
not support a redundancy system.
Update module firmware.
16#E26A
Module on the main backplane slot 10
does not support a redundancy system.
Update module firmware.
16#E26B
Module on the main backplane slot 11
does not support a redundancy system.
Update module firmware.
16#E270
Network module on the main backplane
slot 0 does not connect to a network cable.
Make sure the network cable is connected to the
network module on the main backplance slot 0.
16#E271
Network module on the main backplane
slot 1 does not connect to a network cable.
Make sure the network cable is connected to the
network module on the main backplance slot 1.
16#E272
Network module on the main backplane
slot 2 does not connect to a network cable.
Make sure the network cable is connected to the
network module on the main backplance slot 2.
16#E273
Network module on the main backplane
slot 3 does not connect to a network cable.
Make sure the network cable is connected to the
network module on the main backplance slot 3.
16#E274
Network module on the main backplane
slot 4 does not connect to a network cable.
Make sure the network cable is connected to the
network module on the main backplance slot 4.
16#E275
Network module on the main backplane
slot 5 does not connect to a network cable.
Make sure the network cable is connected to the
network module on the main backplance slot 5.
16#E276
Network module on the main backplane
slot 6 does not connect to a network cable.
Make sure the network cable is connected to the
network module on the main backplance slot 6.
16#E277
Network module on the main backplane
slot 7 does not connect to a network cable.
Make sure the network cable is connected to the
network module on the main backplance slot 7.
16#E278
Network module on the main backplane
slot 8 does not connect to a network cable.
Make sure the network cable is connected to the
network module on the main backplance slot 8.
16#E279
Network module on the main backplane
slot 9 does not connect to a network cable.
Make sure the network cable is connected to the
network module on the main backplance slot 9.
16#E27A
Network module on the main backplane
slot 10 does not connect to a network
cable.
Make sure the network cable is connected to the
network module on the main backplance slot 10.
16#E27B
Network module on the main backplane
slot 11 does not connect to a network
cable.
Make sure the network cable is connected to the
network module on the main backplance slot 11.