Delta AH500 - Page 590

Chapter 12 Troubleshooting
12-41
16#9B23
An error occurs when COM2
communicates with slave 3 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 3.
2. Check the communication cable.
16#9B24
An error occurs when COM2
communicates with slave 4 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 4.
2. Check the communication cable.
16#9B25
An error occurs when COM2
communicates with slave 5 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 5.
2. Check the communication cable.
16#9B26
An error occurs when COM2
communicates with slave 6 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 6.
2. Check the communication cable.
16#9B27
An error occurs when COM2
communicates with slave 7 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 7.
2. Check the communication cable.
16#9B28
An error occurs when COM2
communicates with slave 8 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 8.
2. Check the communication cable.
16#9B29
An error occurs when COM2
communicates with slave 9 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 9.
2. Check the communication cable.
16#9B2A
An error occurs when COM2
communicates with slave 10 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 10.
2. Check the communication cable.
16#9B2B
An error occurs when COM2
communicates with slave 11 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 11.
2. Check the communication cable.
16#9B2C
An error occurs when COM2
communicates with slave 12 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 12.
2. Check the communication cable.
16#9B2D
An error occurs when COM2
communicates with slave 13 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 13.
2. Check the communication cable.
16#9B2E
An error occurs when COM2
communicates with slave 14 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 14.
2. Check the communication cable.
16#9B2F
An error occurs when COM2
communicates with slave 15 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 15.
2. Check the communication cable.
16#9B30
An error occurs when COM2
communicates with slave 16 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 16.
2. Check the communication cable.
16#9B31
An error occurs when COM2
communicates with slave 17 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 17.
2. Check the communication cable.
16#9B32
An error occurs when COM2
communicates with slave 18 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 18.
2. Check the communication cable.
16#9B33
An error occurs when COM2
communicates with slave 19 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 19.
2. Check the communication cable.
16#9B34
An error occurs when COM2
communicates with slave 20 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 20.
2. Check the communication cable.