Delta AH500 - Page 591

AH500 Hardware and Operation Manual
12-42
16#9B35
An error occurs when COM2
communicates with slave 21 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 21.
2. Check the communication cable.
16#9B36
An error occurs when COM2
communicates with slave 22 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 22.
2. Check the communication cable.
16#9B37
An error occurs when COM2
communicates with slave 23 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 23.
2. Check the communication cable.
16#9B38
An error occurs when COM2
communicates with slave 24 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 24.
2. Check the communication cable.
16#9B39
An error occurs when COM2
communicates with slave 25 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 25.
2. Check the communication cable.
16#9B3A
An error occurs when COM2
communicates with slave 26 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 26.
2. Check the communication cable.
16#9B3B
An error occurs when COM2
communicates with slave 27 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 27.
2. Check the communication cable.
16#9B3C
An error occurs when COM2
communicates with slave 28 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 28.
2. Check the communication cable.
16#9B3D
An error occurs when COM2
communicates with slave 29 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 29.
2. Check the communication cable.
16#9B3E
An error occurs when COM2
communicates with slave 30 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 30.
2. Check the communication cable.
16#9B3F
An error occurs when COM2
communicates with slave 31 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 31.
2. Check the communication cable.
16#9B40
An error occurs when COM2
communicates with slave 32 by
Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 32.
2. Check the communication cable.
16#9B41
COM2 receives no response from
slave 1 by Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 1.
2. Check the communication cable.
16#9B42
COM2 receives no response from
slave 2 by Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 2.
2. Check the communication cable.
16#9B43
COM2 receives no response from
slave 3 by Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 3.
2. Check the communication cable.
16#9B44
COM2 receives no response from
slave 4 by Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 4.
2. Check the communication cable.
16#9B45
COM2 receives no response from
slave 5 by Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 5.
2. Check the communication cable.
16#9B46
COM2 receives no response from
slave 6 by Modbus.
1. Check the communication setting in the master, and
the communication setting in slave 6.
2. Check the communication cable.