Delta AH500 - Page 620

Chapter 12 Troubleshooting
12-71
Error
code
Description
CPU
Status
LED indicator status
ERROR
BUS
FAULT
16#8612
An error occurs when data is accessed from the
memory card, or the memory card is in read-only
mode.
Continue Keep Keep
16#9A01
The setting of the data exchange for slave 1 in the PLC
Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A02
The setting of the data exchange for slave 2 in the PLC
Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A03
The setting of the data exchange for slave 3 in the PLC
Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A04
The setting of the data exchange for slave 4 in the PLC
Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A05
The setting of the data exchange for slave 5 in the PLC
Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A06
The setting of the data exchange for slave 6 in the PLC
Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A07
The setting of the data exchange for slave 7 in the PLC
Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A08
The setting of the data exchange for slave 8 in the PLC
Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A09
The setting of the data exchange for slave 9 in the PLC
Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A0A
The setting of the data exchange for slave 10 in the
PLC Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A0B
The setting of the data exchange for slave 11 in the
PLC Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A0C
The setting of the data exchange for slave 12 in the
PLC Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A0D
The setting of the data exchange for slave 13 in the
PLC Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A0E
The setting of the data exchange for slave 14 in the
PLC Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A0F
The setting of the data exchange for slave 15 in the
PLC Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A10
The setting of the data exchange for slave 16 in the
PLC Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A11
The setting of the data exchange for slave 17 in the
PLC Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A12
The setting of the data exchange for slave 18 in the
PLC Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A13
The setting of the data exchange for slave 19 in the
PLC Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A14
The setting of the data exchange for slave 20 in the
PLC Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A15
The setting of the data exchange for slave 21 in the
PLC Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A16
The setting of the data exchange for slave 22 in the
PLC Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A17
The setting of the data exchange for slave 23 in the
PLC Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep
16#9A18
The setting of the data exchange for slave 24 in the
PLC Link / COM1 MODBUS is incorrect. (SM1590)
Continue Keep Keep