C 11 27
8 Transportation
m
Reduce the feeder to its basic width. Remove all protruding or loose parts from
the feeder. Stow all parts securely.
m
The vehicle must be cleaned, all material deposits removed and all maintenance flaps
closed correctly.
m
Only accessories and extension parts may be transported in the hopper, no material!
m
Lock the lane cleaner in the upper position.
m
Swivel in the operating panel guide and seat consoles; insert the relevant locking
bolts appropriately.
The operating panel must be moved to the side of the oncoming traffic and secured
in this position.
m
The headlights and warning lamps must be switched on and properly adjusted.
Additional stipulations for transportation on public roads:
m
In Germany, feeders must never be driven as self-propelling vehicles
on public roads.
Note that in other countries different regulations may apply.
The operator must be in the possession of a valid permit for vehicles of this type.
Danger due to restricted vision
Restricted vision poses a risk of injury!
- Before starting work, arrange the intended driver's seat
to ensure adequate vision.
- Banksmen must be used when vision is restricted, also
to the sides and when reversing.
- Only reliable persons may be used as banksmen who
must have been received instructions about their task
before taking up their activity. This refers in particular to
the hand signals to be used. Standardised hand signals
must be used.
- Adequate lighting must be provided when working
at night.
- Comply with all further information in these instructions
and in the safety manual.
To Next Page
Loading...