F 33 9
Check conveyor belt for damage
and soiling
f
Perform inspection, cleaning and repairs
only whilst the drive engine is stationary!
A
If discovered early on, conveyor belt damage can be repaired permanently!
- To inspect it, lower the conveyor belt and secure the conveyor belt drive to prevent
reactivation.
A
Check the entire conveyor belt (A) for the following defects:
- Cracks, breakage and wear on the surface and at the sides.
- Missing or loose assembly parts.
- Wear, damage and soiling on the drive chains and chain sprockets.
- Remove encrusted material from the sealing plates (B).
A
Your Dynapac customer service will be happy to provide support during maintenance,
repair and the replacement of wearing parts!
To Next Page
Loading...