Dynapac MF2500CS - Conveyor angle; distance control display and setting menu

D 23 19
"Conveyor angle / distance control" display and setting menu
Menu for checking and setting the following parameters:
- (1) Current distance feeder / paver finisher (m) / (ft)
- (2) Stored parameter "Short distance" (m) / (ft)
- memory location #1
- (3) Stored parameter "Long distance" (m) / (ft)
- memory location #2
- (4) Current slewing angle, conveyor (x°) (o)
- (5) Saved parameter - conveyor angle "top" (x°)(o)
- memory location #1
- (6) Saved parameter - conveyor angle "bottom" (x°)(o)
- memory location #2
2
4
1
3
5
6