E 8
Raise the slewing belt and fasten to the feeder
Danger from suspended loads
Crane and/or lifted slewing belt can tip when lifted and
cause injuries!
- The slewing belt may only be raised at the marked
lifting points.
- Heed the overall weight of the slewing belt.
- Do not enter the danger zone.
- Use only lifting gear that can bear the load.
- Attachment and loading equipment must meet the condi-
tions of the applicable accident prevention regulations!
- Heed the centre of gravity of the slewing belt!
- Do not leave any load or loose parts on the slewing belt.
- Comply with all further information in these instructions
and in the safety manual.
To Next Page
Loading...