F 60 15
Marking hydraulic hoses / storage
period, period of use
A
A number stamped onto the screwed
connection provides information about
the date of manufacture (A) (month /
year) and the maximum pressure per-
mitted for this hose (B).
m
Never install hoses on top of one anoth-
er and always ensure that they are at the
correct pressure.
In individual cases, the period of use can
be stipulated according to experience
and may differ from the following general
indications:
- When producing the hose pipe, the hose (purchased by the meter) should not be
more than four years old.
- The period of use of a hose pipe should not exceed six years, including any possi-
ble storage period.
The storage period should not exceed two years.
To Next Page
Loading...