EasyManua.ls Logo

Dynapac MF2500CS - Mode of operation; Vehicle control elements; Control elements on the operators control station

Dynapac MF2500CS
626 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D 30 1
D 30 Mode of operation
1 Vehicle control elements
1.1 Control elements on the operator's control station
Danger of falling from the vehicle
Entering and leaving the vehicle and the driver's seat
during operation poses a risk of falling from the vehicle,
which can cause severe to fatal injuries!
- The operator must be at the intended driver's seat
during operation.
- Never jump onto or off a moving vehicle.
- Keep accessible surfaces free of any soiling, e.g. operat-
ing substances, to avoid the risk of slipping.
- Use the steps provided and hold onto the handrail with
both hands.
- Comply with all further information in these instructions
and in the safety manual.
WARNING

Table of Contents