F 100 6
7 Cleaning the conveyor system
To clean the hopper, park the vehicle on a smooth surface with the hopper open.
Switch off the engine.
Danger of being pulled in by rotating or conveying
vehicle parts
Rotating or conveying vehicle parts can cause
severe to fatal injuries!
- Do not enter the danger zone.
- Do not reach into rotating or conveying parts.
- Only wear close-fitting clothing.
- Comply with the warning and information signs
on the vehicle.
- Stop the engine and remove the ignition key before any
maintenance work.
- Comply with all further information in these instructions
and in the safety manual.
Caution! Possible destruction of parts
The conveyor belt is fitted with parts that are
sensitive to heat.
- Damage can be caused when using a blowtorch
or similar equipment for cleaning!
Hot surfaces!
Surfaces including those behind covering parts,
together with engine combustion gases can be very hot
and cause injuries!
- Wear your personal safety gear.
- Do not touch hot parts of the vehicle.
- Only perform maintenance and repair work after the
vehicle has cooled down.
- Comply with all further information in these instructions
and in the safety manual.
To Next Page
Loading...