EasyManua.ls Logo

Dynapac MF2500CS - Clean scraper;routine check

Dynapac MF2500CS
626 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
F 33 18
Clean scraper/routine check
m
Clean the scraper after each working day.
m
Danger of subsequent damage! Never clean the scraper in the working position!
Sharp-edged components!
Surfaces subject to wear can be very sharp-edged
and can cause injuries!
- Wear your personal safety gear.
- Comply with all further information in these instructions
and in the safety manual.
Hot surfaces!
Surfaces including those behind covering parts, together
with engine combustion gases, can be very hot and
cause injuries!
- Wear your personal safety gear.
- Do not touch hot parts of the vehicle.
- Only perform maintenance and repair work after the
vehicle has cooled down.
- Comply with all further information in these instructions
and in the safety manual.
Danger from burner
Incorrectly performed work on burners can cause
severe to fatal injuries!
- Wear your personal safety gear.
- See the burner operating instructions and familiarise
yourself with all notes contained in them.
CAUTION
CAUTION
WARNING

Table of Contents