D 11 1
D 11 Operation
1 Safety regulations
f
Injury or death can result through starting the engine, travel drive, conveyor belt or
lifting units.
Before starting, ensure that nobody is working on or underneath the vehicle or stan-
ding in the vehicle's danger area!
- Do not start the engine or do not actuate any controls when this is expressly forbid-
den! Unless otherwise specified, the controls may only be actuated when the engi-
ne is running!
f
Never enter the hopper or conveyor belt whilst the engine is running. Danger to life!
- Always make sure during work that no-one is endangered by the vehicle!
- Ensure that all protective covers and hoods are fitted and secured accordingly!
- Immediately rectify damage which as been ascertained! Operation must not be
continued when the vehicle is defective!
- Do not allow anyone to ride along on the vehicle!
- Remove obstacles from the road and the work area!
- Always try to choose a driver’s position that is opposite to the flowing traffic!
Lock the operating panel and the driver’s seat.
- Maintain sufficient safety clearance from overhanging objects, other vehicles and
points of danger!
- Be careful when travelling on rough terrain to keep the paver finisher from slipping,
tipping or turning over.
f
Always maintain control of the vehicle; never try to use it beyond its capacities!
To Next Page
Loading...