Dynapac MF2500CS - Drivers seat, type II

D 30 12
Driver's seat, type II
f
To avoid damage to health, the individu-
al seat settings should be checked and
adjusted before starting the vehicle.
f
After locking the individual elements,
it must no longer be possible to shift then
to another position.
- Horizontal setting (1).
- Height and slope setting, front (2).
- Height and slope setting, rear (3).
- Weight setting (4).
- Backrest setting (5).
- Armrests with tilt adjustment (6).
- Lumbar support setting (7).
- Seat heating ON/OFF (8).
6
1
2
6
4
3
5
7
8