C 11 3
2 Transportation on low-bed trailers
m
Reduce the feeder to its basic width.
The maximum approach angle is indicated in the section entitled "Technical data"!
m
Check the fill level of the operating substances so that these do not escape when driv-
ing on an incline.
m
Attachment and loading equipment must meet the conditions of the applicable acci-
dent prevention regulations!
m
Remove all protruding or loose parts from the feeder. Stow all parts securely.
m
The vehicle must be cleaned, all material deposits removed and all maintenance flaps
closed correctly.
m
Swivel in the operating panel guide and seat consoles; insert the relevant locking
bolts appropriately.
To Next Page
Loading...