B 5
2.1 Vehicle
Construction
The feeder has a welded steel frame on which the individual assemblies are mounted.
The caterpillar drives are able to compensate uneven areas on the ground.
The continuously adjustable hydrostatic travel drive allows the speed of the feeder
to be matched to the relevant work conditions.
Operation of the feeder is made considerably easier by the clearly arranged operating
elements and controls.
The following extra equipment (option) is available:
o Slewing conveyor belt
o Automatic steering unit
o Feeder-paver finisher distance control
o Material requirement signal system
o Additional headlights, warning lamps, work lighting
o Camera system
o Reverse buzzer
o 12 volt system
o Luxury seats
o Fire extinguisher
o Further equipment and upgrade options on request
To Next Page
Loading...