C 11 30
9 Loading by crane
m
Use only lifting gear that can bear the load.
(See chapter B for weights and dimensions).
m
Attachment and loading equipment must meet the conditions of the applicable acci-
dent prevention regulations!
m
The vehicle's centre of gravity is dependent on the conveyor belt version.
m
Disconnect the slewing conveyor belt (o) from the vehicle before loading by crane!
The vehicle and conveyor belt must be loaded separately!
Danger from suspended loads
Crane and/or lifted vehicle can tip when lifted
and cause injuries!
- The vehicle may only be raised at the marked
lifting points.
- Heed the operating weight of the vehicle.
- Do not enter the danger zone.
- Use only lifting gear that can bear the load.
- Do not leave any load or loose parts on the vehicle.
- Comply with all further information in these instructions
and in the safety manual.
To Next Page
Loading...