D 23 54
3.1 Error message drive lever
A
If a fault is detected in the drive lever, this is shown by the corresponding indication
in the display. The display appears directly but can be quit.
A
The vehicle can be moved away from the construction site in emergency mode:
- Turn the travel drive preselector (1) to zero. The LEDs in buttons (2) and (3) flash.
- Forwards travel: Press and hold the function button "turn on the spot" (2), adjust
speed with the travel drive preselector (1).
- Reverse travel: Press and hold the function button "transport gear" (3), adjust
speed with the travel drive preselector (1).
To Next Page
Loading...