C 11 16
Protective roof (o)
The protective roof can be raised and
lowered with a manual hydraulic pump.
A
The exhaust pipe is lowered or raised to-
gether with the roof.
(for "rigid" platform version)
- Connect the pump lever (1)
to the pump (2).
- Tighten bolts (3) on both sides
of the roof.
- Operate the pump lever (1) until the
roof has reached the upper or lower
limit position.
- Set bolts (3) in the respective posi-
tion on both sides of the roof.
A
Place the pump lever in the bracket (6).
m
After lowering, check whether the pin (7)
of the side windows is located in the rel-
evant mounting.
To Next Page
Loading...