F 60 12
A
Oil change > / = s/n XXXX
- Unscrew seal cap (C).
- Screwing on the oil drainage hose (D)
opens the valve to let the oil drain out.
- Place the end of the hose in the col-
lecting vessel and let the oil drain com-
pletely.
- Unscrew the drainage hose and return
the screw cap.
Bleeder
A
The bleeder (A) can be found on the rear
of the pump distribution gear housing.
- The functioning of the bleeder must be
ensured.
If soiling has occurred, the bleeder
should be cleaned.
To Next Page
Loading...