B 40
6.7 Further warnings and operating instructions
No.
Pictogram Meaning
70
- Attention - Danger of high voltage
in vehicle electrical system!
Disconnect batteries and electronics dur-
ing welding work or when charging the
batteries, or use a service watchdog
D978000024 in accordance with the cor-
responding instruction manual.
73
- Attention - Check conveyor belt sag!
When the conveyor belt end piece is in the
horizontal position, conveyor belt sag must
be correctly set at the marked position!
Always observe the maintenance
instructions!
74
- Attention - Note rigid / slewing con-
veyor belt scraper hydraulic switching!
Set hydraulic valve accordingto
vehicle equipment!
Always observe the operating
instructions!
75
- Attention - Danger zone!
Entering the danger zone between the
feeder and the paver finisher can trigger
undesired vehicle movements; these may
lead to severe to fatal injuries!
Never enter the danger zone!
To Next Page
Loading...