D 11 19
Item Designation Brief description
32
Turning
on the spot
Button with detent switch function and LED feedback:
- The vehicle turns on the spot (the caterpillar chains
run in opposite directions) when the steering is set
to "10".
- Steering turned to the left = vehicle turns to the left
- Steering turned to the right = vehicle turns to the right
A
The function can only be activated in the working gear
("travel drive slow") speed.
A
If the "Turning on the spot" function has been inadver-
tently activated (and the steering is set to straight-
ahead travel), the paver finisher does not move. This is
often interpreted as a "malfunction".
f
When the vehicle turns, persons and objects next to
the paver finisher are in extreme danger. Monitor the
area where the vehicle turns!
33
Traction drive
speed fast
(hare)
Buttons with detent switch function and LED feedback:
- To preselect the speed level -
transport speed
A
On restarting, the speed is set to operating speed.
To Next Page
Loading...