D 11 43
Item Designation Brief description
60
Distance control
ON / OFF
stage II,
save distance
value (o)
Button with detent switch function and LED feedback:
A
Distance control can only be activated whilst the vehicle
is moving in working gear when the conveying function
is engaged.
The vehicle speed is automatically adapted to the
speed of the paver finisher.
When the paver finisher comes to a stop, the feeder is
halted and all "Auto" functions are paused.
- Activate distance control when the feeder has
reached the desired position and the distance is to
be maintained.
A
If the current position is maintained, the LEDs on the
distance control light up.
- Switch OFF by pressing the button again or actuating
the drive lever.
- To save the current distance value, press the button
for approx. 2 sec.
- Press the button again to use the stored distance value.
A
If the distance value from the memory is used, the rele-
vant button's LED lights up.
- Switch OFF by pressing the button again or actuating
the drive lever.
A
For further information on the stored distance values,
refer to the section entitled "Input and display terminal"
A
Distance control can be activated in a distance range
between 0.2 and 9.9 m.
A
If necessary, adjust the distance
using buttons (61)/(62).
A
If the LED flashes, Distance Assist is in "standby".
Press button 1x to release
To Next Page
Loading...