D 11 67
Item Designation Brief description
115
Emergency
stop button
In the case of an emergency (danger to persons, possible col-
lision, etc.), press the button!
- Pressing the emergency stop button switches off the engi-
ne, the drives and the steering system.
Making way, moving the conveyor belt, etc. is then no lon-
ger possible! Danger of accident!
- To restart the engine, the button must be pulled out again.
116
Key switch
conveyor belt
maintenance
Key switch with detent switch function:
- For releasing and blocking the conveyor belt mainte-
nance functions.
- Switch setting I: functions released
- Switch setting 0: functions blocked, remove key.
A
Observe maintenance intervals for conveyor
belt tension!
m
If the function is not required, remove the key from
the switch.
A
When conveyor belt maintenance is engaged, all con-
veyor belt functions on the operating panel are blocked.
To Next Page
Loading...