D 11 79
Item Designation Brief description
129
Main conveyor
belt + slewing
conveyor belt -
"MANUAL /
"AUTO"
For switching the "MANUAL" and "AUTO" modes of the con-
veying function ON and OFF:
- Engaging the "MANUAL" mode: Press button (124) briefly
(< 1 second).
A
The conveying function is switched on continuously
at half of the delivery rate, without material control via
the limit switches.
- Switch OFF by pressing the button again (briefly).
- Engaging the "AUTO" mode: Press button (124)
min. 1 second.
A
The conveying function is switched on when the drive
lever is swivelled out and is continuously controlled via
the material limit switches.
- Switch OFF by pressing the button again
(min 1 second).
A
The function is shut off by pressing the EMERGENCY
STOP button or restarting the vehicle.
A
The main function switch (operating panel) locks the
conveying function.
f
On actuation, heed danger zones of moving parts of
the vehicle!
To Next Page
Loading...