D 11 83
m
When fitted with SW6500:
Every time after restarting the vehicle, the main conveyor has to be moved into its up-
per end position when starting up the conveying function for the first time or when ac-
tuating functions (43-46) / (131-134)!
Function buttons (47) and (48) are then deactivated until the next restart.
Item Designation Brief description
131 Raise slewing belt
Pushbutton:
- To raise the slewing belt.
f
On actuation, heed danger zones of moving parts of
the vehicle!
132 Lower slewing belt
Pushbutton:
- To lower the slewing belt.
f
On actuation, heed danger zones of moving parts of
the vehicle!
133
Swivel slewing belt
to the left
Pushbutton function:
- For slewing the conveyor belt to the left.
f
On actuation, heed danger zones of moving parts of
the vehicle!
134
Swivel slewing belt
to the right
Pushbutton function:
- For slewing the conveyor belt to the right.
f
On actuation, heed danger zones of moving parts of
the vehicle!
To Next Page
Loading...