EasyManua.ls Logo

Dynapac MF2500CS - Page 246

Dynapac MF2500CS
626 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D 23 48
Explanations Symbol in the display
- Indicator lamp automatic particulate filter re-
generation - deactivated
Particulate filter regeneration is deactivated.
- Automatic regeneration should only be deacti-
vated if the operating status of the paver finish-
er does not permit any automatic function.
A
see "Particulate filter regeneration" menu
- Warning - high exhaust gas temperature!
(HEST)
The indicator lamp indicates a high exhaust gas
temperature!
A
It is normal for the indicator lamp to go on
and off during operation while the exhaust
gas system is being cleaned by the engine.
f
Keep the outlet of the exhaust pipe out of the
reach of people and of objects that can burn,
melt or explode!
f
There may not be any people or objects with-
in a radius of 0.6 m of the exhaust outlet!
f
There may not be any objects or substances
that can burn, melt or explode within a radius
of 1.5 m. (petrol, wood, paper, plastic, tex-
tiles, pressurised cylinders, hydraulic lines).
A
In an emergency, turn the engine off
so that no more exhaust gas is emitted!
- Indicator lamp AdBlue
®
/ DEF
The level of AdBlue
®
/ DEF is insufficient.
Level 10% - display flashes
Level 5% - display stays on permanently
Level 0% - drive engine is throttled to
emergency mode
m
Urgent need to refill AdBlue
®
/ DEF fluid!
A
The error message is accompanied
by an acoustic signal!

Table of Contents