D 23 50
Explanations Symbol in the display
- Pending service:
A
A maintenance interval is about to expire.
m
Proceed immediately with maintenance
to avoid subsequent damage!
- Service overdue:
A
A maintenance interval is overdue.
m
Proceed immediately with maintenance
to avoid subsequent damage!
- Conveyor maintenance:
A
Conveyor belt is in maintenance mode.
(activated at the side operating unit)
m
When conveyor belt maintenance is en-
gaged, all conveyor belt functions on the op-
erating panel are blocked!
- Indicator lamp separator fluid
The separator fluid is down to the reserve level in
the tank.
A
Approx. 10% remains
m
Urgent need to refill separator fluid!
- Distance control
Distance control cannot be activated / a malfunc-
tion is detected during operation.
(accompanied by an acoustic signal).
A
Distance control can be deactivated with the
corresponding switch.
A
The feeder cannot be accelerated by the dis-
tance control.
The signal lamp shows the feeder operators
that distance control is deactivated
- Joystick (o) moved out
The joystick is moved out for forward
or reversing mode.
A
To start the vehicle, the joystick must first be
returned to "zero".
To Next Page
Loading...